Bad Frost plug hole

[StudeRich]

If anyone has any of the 1562875 to sell drop me a PM stating quantity and price. I see no reason that they will not work in the latter blocks that used the disk type plugs. Easy to install and no worry of them blowing out.
Ron

Since Studebaker went to the trouble to issue two different style service parts for the bolt-in frost (core) plugs (one style for the disc-type, and one style for the disc type), it will be interesting to see if the 1562875 cup-style works in the disc-type blocks. Let us know how this works out.

Looks like AGAIN we are getting our Disc and Cups mixed up! One appears to be only a typo, not sure about the other one.

As mentioned here, 1562875 is for Disc Type CORE Plug Blocks '51-Early '62, and 1562876 is for CUP Type CORE Plug Blocks, Late '62-'64, both removable "Service Plugs" were issued at the same time, after the '51 to Early '62 Type Blocks using Disc Type were made, so this exact TYPE will NOT exist in the '51-'58 Catalogs.

Previously, the Dorman Type Brass, bolt-in Type of "Service Plug" was used, without an "O" Ring.

[r1lark]

Whew, you are right Rich, my response in post #42 was all screwed up! I've gone back and revised it so it won't confuse folks who read it in the future.

Post #45 is correct, since that info came directly out of the '59-'64 Parts Manual.