Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

V8 Firing Order & Valve Setting

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • V8 Firing Order & Valve Setting

    I have tried to find out what the firing order, cylinder numbering layout and valve adjustment settings on a 1960 259 V8 Lark but have had no luck. Does any one know where I could look?

    1961 Lark

  • #2
    Studebaker passenger car Shop Manual. Available from Studebaker International Inc for $48.00 US.
    Firing order is 1,8,4,3,6,5,7,2.


    Studebaker International Inc.
    97 North 150 West
    Greenfield, IN 46140-8562

    If you already have the book look under group III and your engine. All you are asking about is on the first couple of pages of the section.
    Good luck!

    Lotsa Larks!
    K.I.S.S. Keep It Simple Studebaker!
    Ron Smith
    Home of the famous Mr. Ed!
    K.I.S.S. Keep It Simple Studebaker!
    Ron Smith
    Where the heck is Fawn Lodge, CA?

    Comment


    • #3
      Thanks, I was able to set the valves and finish my project.

      1961 Lark

      Comment


      • #4
        If you forget the fireing order again look on you intake manifold....IT says fireing order.....

        If you car is ugly then it better be fast.....

        65 2dr sedan
        64 2dr sedan (Pinkie)
        61 V8 Tcab
        61 Tcab 20R powered
        54 Champion Wagon
        If you car is ugly then it better be fast.....

        65 2dr sedan
        64 2dr sedan (Pinkie)
        61 V8 Tcab
        63 Tcab 20R powered
        55 Commander Wagon
        54 Champion Wagon
        46 Gibson Model A
        50 JD MC
        45 Agricat
        67 Triumph T100
        66 Bultaco Matadore

        Comment

        Working...
        X