Announcement

Collapse
No announcement yet.

3588S Pump Seal

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 3588S Pump Seal

    For a R2 Carb does the accelerator pump seal come in a carb kit from SI? Where can I find a picture of it?
    Allen


  • #2
    quote:Originally posted by satdoc2

    For a R2 Carb does the accelerator pump seal come in a carb kit from SI? Where can I find a picture of it?
    Allen
    The seal is not included in the kit.



    Bob Langer
    Glenshaw,PA





    Bob Langer
    Glenshaw,PA

    Comment


    • #3
      I've purchase 2 kits that had seals in them. Look for a kit that covers both auto and marine. That seal is not what an original seal looks like. Originals were two fiber washers separated by spring. At least that's what I found on my 3725s. I do remember having issues with the accel pump fit when I switched out the originals.



      1988 "Beater" Avanti---R2 R5388 @ Macungie 2006

      Comment


      • #4
        I used a seal like the one pictured. It seals fine, but I could not get enough travel for the accelarator pump, and had to file the seal down to make it thinner - it is quite a bit thicker than the one the R2 carbs orginally came with.

        Eric DeRosa

        '49 2R-5 (original Survivor)
        '63 R2 Lark (barely surviving)
        Eric DeRosa


        \'63 R2 Lark
        \'60 Lark Convertible

        Comment


        • #5
          The picture has a washer-like retainer. What is inside or under it? 2R2, what did you file down?
          Allen

          Comment


          • #6
            R2 Carb punp seals

            Here are the used pump seal parts for the R2 carb.
            Allen
            Attached Files

            Comment

            Working...
            X