Does anyone have the actual closed and open specs of the r2+ springs? I searched the forums and couldnt find what I am looking for. Called Phil and he didnt have all of them.
Thanks
Jon
Thanks
Jon
-
-
Standard Studebaker R1-R2 springs at 155 PSI should be fine on a R1, R2 or R2+ Cam. The installed height and tested spring pressure at that height is all you should need.
Shim them up to correct any issues there.
StudeRichStudeRich
Second Generation Stude Driver,
Proud '54 Starliner Owner
SDC Member Since 1967 -
Stock installed height is 2.031" and R 2+ is 90#. At 1 3/4" is 155#. At 1.631" (.400" lift and is what the R 2 cam would be) is 185. Coil bind is 1.375".
Stock R 2 springs are 135* at 1 3/4"
Ted
quote:Originally posted by Colo.Jon
Does anyone have the actual closed and open specs of the r2+ springs? I searched the forums and couldnt find what I am looking for. Called Phil and he didnt have all of them.
Thanks
JonComment
-
Thank you for the answers!!!!!!!!!!!!
JonComment
Comment