Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

Speedometer/Tach Diameter

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Speedo/Tach/Gauges: Speedometer/Tach Diameter

    Quick dumb question. I'm a thousand miles away from my Sky Hawk, so here goes. What is the diameter of the holes in the dash for the speedometer and tachometer in my Sky Hawk?...

  • #2
    Didn't measure mine, but found this. They are pretty standard, I believe. https://www.speedwaymotors.com/Stewa...nch,37697.html

    Comment


    • #3
      If it's the same as my '62 GT, the speedo, tach and clock are all 3 3/8" the hole in the dash is a bit larger, the GT's are around 3 9/16" but the gauge fits through an extra chrome bezel. The small gauges are standard 2 1/16" diameter.
      sigpic

      Comment


      • #4
        Thanks, guys...

        Comment

        Working...
        X