Does anyone know of a radio repair shop that is known to do good work? I purchased a wonder bar radio for my 58 President and it needs to be cleaned up before I install it. Would also like to know who does the white push buttons over.
-
-
RadioRoy repairs them, I'm sure He'll be along.Joseph R. Zeiger -
Contact Terry Dewick in Knoxville, Tenn.........amazing work and skill!!Originally posted by mnmfive View PostComment
-
Yes, try Radio Roy...he's legit!Lou Van Anne
62 Champ
64 R2 GT Hawk
79 Avanti IIComment
-
Thanks for the recommendations, gentlemen, but I don't repair printed circuit board technology. That is a choice I made 45 years ago, when I was actually repairing that stuff for a living.
I prefer to replace the old printed circuit boards in these radios with new technology boards. Everything looks the same from the operator's perspective, it looks completely stock, but the radio works and sounds better and gets FM stereo.
The only old technology I repair is the hard wired tube stuff - before they went to printed circuit boards. With those radios, you get a choice of original technology repair or conversion to new technology. From a Studebaker perspective, that is 1957 and older.
For 1958 and newer, I always recommend an upgrade. I've upgraded these Studebaker signal seekers before, and now the upgrade technology is even better.Last edited by RadioRoy; 11-22-2015, 03:48 PM.Comment
-
-
I will do repairs to the original printed circuit boards in Studebaker Delco radios. If you are interested, please send me a PM with your contact information. BudComment
-
-
Good GriefOriginally posted by RadioRoy View PostThanks for the recommendations, gentlemen, but I don't repair printed circuit board technology. That is a choice I made 45 years ago, when I was actually repairing that stuff for a living.
I prefer to replace the old printed circuit boards in these radios with new technology boards.
Everything looks the same from the operator's perspective, it looks completely stock, but the radio works and sounds better and gets FM stereo.
The only old technology I repair is the hard wired tube stuff - before they went to printed circuit boards. With those radios, you get a choice of original technology repair or conversion to new technology. From a Studebaker perspective, that is 1957 and older.
For 1958 and newer, I always recommend an upgrade. I've upgraded these Studebaker signal seekers before, and now the upgrade technology is even better.
Roy...Here I am, sitting here thinking I'm kinda "up to date" for a 71 year-old
...until I read your post.
Geez...I was thinking printed circuit boards was the "NEW" technology.
John Clary
Greer, SC
SDC member since 1975Comment
-
John,
The new boards are multilayer, very densely populated, and full of surface mount components.
The PC boards in our old radios are single layer, usually one sided, and were basically repairable - back in the day. After serving in our cars for 60 years, though, they get brittle and develop micro cracks, and the traces start to peel off the boards. Many folks still repair them, but I do not have the patience/talent/energy/drive/interest to do so. I like the things I repair to stay repaired.
Comment
-
RadioRoy
How does one get ahold of you, I have a radio out of a 50 I would like to talk to you about.
Jerry Kurtz York PaComment
-
Comment
-
Comment