Announcement

Collapse
No announcement yet.

Just Picked up a 1937 Studebaker Dictator Coupe

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Yes! Thanks Tom!

    Comment


    • #17
      Thanks, Tom.
      I did that from memory, and wayward light purchases in the past...
      HTIH (Hope The Info Helps)

      Jeff


      Get your facts first, and then you can distort them as much as you please. Mark Twain



      Note: SDC# 070190 (and earlier...)

      Comment


      • #18
        Many, perhaps most, cars of the era also came without outside rear view mirrors. Most that you see are clamped to the edge of the door. Many like this are readily available new.
        Brad Johnson,
        SDC since 1975, ASC since 1990
        Pine Grove Mills, Pa.
        '33 Rockne 10, '51 Commander Starlight. '53 Commander Starlight
        '56 Sky Hawk in process

        Comment


        • #19
          I believe that President coupes and probably sedans had two tail lights. At least all I've seen have two. Shrock Bros. reproduces the lens. 36-7 Dodge/Plymouth bezels will work I believe. I had one that did and another which did not.
          Last edited by 5brown1; 03-24-2015, 11:04 AM.

          Comment


          • #20
            Stunningly gorgeous you very lucky dog.
            Bill

            Comment


            • #21
              Hey Guys Tks For the Replies!
              Just got the Insurance card in & Put it in Glove box well through Glove box Door & it fell on floor! Does anyone repop Glove boxes for a 37?? Tks in advance! Bill

              Comment


              • #22
                Hi Bill. Studebaker part number for the left rear fender taillight stand is 263359P and the right stand is 263358P. Tom

                Comment


                • #23
                  Thanks Tom!

                  Comment


                  • #24
                    Ernie Loga makes glove boxes. 715-832-7302 He has an ad in the business card section toward the back of Turning Wheels.

                    Comment


                    • #25
                      Tks 5 Brown 1 I'm on it! Pulled the carb & having it rebuilt! Pulled the starter pull cable soaked it got it out greased & it works great! Problem with peep mirrors are both doors very tight on hinge side & no room for peep! Has anyone tried the hinge mount mirrors? Tks again for all the replies! Bill

                      Comment


                      • #26
                        Originally posted by mtnmanbf View Post
                        <snip>
                        Problem with peep mirrors are both doors very tight on hinge side & no room for peep! Has anyone tried the hinge mount mirrors? Tks again for all the replies! Bill
                        The issue with mirrors it the body is kind of wedge shaped (at least to the rear of the front doors.
                        Mirrors have to hang out quite far to get a straight line look backwards.
                        With peep mirrors all you can see is the window channel behind you.

                        Stude used longer hinge mounted mirrors on the CE's.
                        Kind of an angular look....
                        I fell for the street rod 'swan' style mirrors. But even they could be longer.



                        Still hard to see out of the rear view mirrors...
                        And the coupe has a huge blind spot.....
                        HTIH (Hope The Info Helps)

                        Jeff


                        Get your facts first, and then you can distort them as much as you please. Mark Twain



                        Note: SDC# 070190 (and earlier...)

                        Comment


                        • #27
                          TKS JEFF! Yeah I ran these on my Willys & never could see out of them! A 3 Window coupe is just hard to see out of! Tks! Bill
                          Attached Files

                          Comment

                          Working...
                          X