Announcement

Collapse
No announcement yet.

Proving Ground Oval Repaving

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Proving Ground Oval Repaving

    Geeze, we've heard of "where the rubber meets the road..."
    Well, here the rubber is the road...at the former Studebaker Proving Ground high-speed oval!


  • #2
    Notice the article calls it a three mile oval. I seem to recall that GM removed the top (outer) lane during WWII, effectively reducing it to a 2 1/2 mile oval.


    Dwain G.
    Restorations by Skip Towne

    Comment


    • #3
      Notice the article calls it a three mile oval. I seem to recall that GM removed the top (outer) lane during WWII, effectively reducing it to a 2 1/2 mile oval.


      Dwain G.
      Restorations by Skip Towne

      Comment


      • #4
        I've been reading about using old tires for repaving roads. It's a great idea and should be the standard for repaving. We're recycling almost everything else so this should be a natural and at the same time, we're cutting down pollution.
        Rog

        '59 Lark VI Regal Hardtop
        '59 Lark VI Regal Hardtop
        Smithtown,NY
        Recording Secretary, Long Island Studebaker Club

        Comment


        • #5
          I've been reading about using old tires for repaving roads. It's a great idea and should be the standard for repaving. We're recycling almost everything else so this should be a natural and at the same time, we're cutting down pollution.
          Rog

          '59 Lark VI Regal Hardtop
          '59 Lark VI Regal Hardtop
          Smithtown,NY
          Recording Secretary, Long Island Studebaker Club

          Comment


          • #6
            Just wondering, what happens to the steel belts that are in modern tires? The article only mentions that they are shredded, but how is the metal pulled out. Seems to me that if left in that it could cause a whole series of problems....


            Comment


            • #7
              Just wondering, what happens to the steel belts that are in modern tires? The article only mentions that they are shredded, but how is the metal pulled out. Seems to me that if left in that it could cause a whole series of problems....


              Comment


              • #8
                Magnets. Same way ferrous metal is removed from trash at incinerators, recycling centers, any processing center.

                PackardV8
                PackardV8

                Comment


                • #9
                  Magnets. Same way ferrous metal is removed from trash at incinerators, recycling centers, any processing center.

                  PackardV8
                  PackardV8

                  Comment


                  • #10
                    Dwain; what does this GM mean? Surely you don't mean General Motors? [?]
                    I wouldn't think Studebaker would allow anyone from there, anywhere near that Proving Grounds!!! Certainly not before the late 1960's while they still owned and controlled it! Before Bendix bought it. [:0] [:0]

                    quote:Originally posted by Dwain G.

                    Notice the article calls it a three mile oval. I seem to recall that GM removed the top (outer) lane during WWII, effectively reducing it to a 2 1/2 mile oval.
                    StudeRich
                    Studebakers Northwest
                    Ferndale, WA
                    StudeRich
                    Second Generation Stude Driver,
                    Proud '54 Starliner Owner
                    SDC Member Since 1967

                    Comment


                    • #11
                      Dwain; what does this GM mean? Surely you don't mean General Motors? [?]
                      I wouldn't think Studebaker would allow anyone from there, anywhere near that Proving Grounds!!! Certainly not before the late 1960's while they still owned and controlled it! Before Bendix bought it. [:0] [:0]

                      quote:Originally posted by Dwain G.

                      Notice the article calls it a three mile oval. I seem to recall that GM removed the top (outer) lane during WWII, effectively reducing it to a 2 1/2 mile oval.
                      StudeRich
                      Studebakers Northwest
                      Ferndale, WA
                      StudeRich
                      Second Generation Stude Driver,
                      Proud '54 Starliner Owner
                      SDC Member Since 1967

                      Comment


                      • #12
                        [quote]Originally posted by raprice

                        I've been reading about using old tires for repaving roads. It's a great idea and should be the standard for repaving. We're recycling almost everything else so this should be a natural and at the same time, we're cutting down pollution.
                        Rog

                        Seems to me, that was (and probably still is) 'the norm' in Czechslovakia for years and years. They shredded up old tires and mixed it with the asphalt and concrete for a good road surface. The only reason the US didn't talk about it was because the idea came from the 'ememy' at the time.

                        Craig

                        Comment


                        • #13
                          [quote]Originally posted by raprice

                          I've been reading about using old tires for repaving roads. It's a great idea and should be the standard for repaving. We're recycling almost everything else so this should be a natural and at the same time, we're cutting down pollution.
                          Rog

                          Seems to me, that was (and probably still is) 'the norm' in Czechslovakia for years and years. They shredded up old tires and mixed it with the asphalt and concrete for a good road surface. The only reason the US didn't talk about it was because the idea came from the 'ememy' at the time.

                          Craig

                          Comment


                          • #14
                            They have been rubberising the freeways around Phoenix. They are great. It makes a drastic reduction in road noise.
                            Denny L

                            Comment


                            • #15
                              They have been rubberising the freeways around Phoenix. They are great. It makes a drastic reduction in road noise.
                              Denny L

                              Comment

                              Working...
                              X