Announcement

Collapse
No announcement yet.

Looking for information on any 2R truck body parts

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Guido
    replied
    Both are fairly rust free, but the cab has some minor dents in the roof. It is complete with doors (though I think the handles may be missing). As I recall, the floors are solid, no seat or frame. I would like $400 for it.

    The bed is also solid, very minor waving in the floor and a straight tailgate. Very minor rust in the fenders, but there is a small piece out of 1 fender. Last I checked, it was under the seat of my rollback. I need $550 for it.

    Gary

    Guido Salvage - "Where rust is beautiful"

    1946 M-16 fire truck
    1948 M-16 grain truck
    1949 2R16A grain truck
    1949 2R17A fire truck
    1955 E-38 grain truck
    1957 3E-40 flatbed
    1961 6E-28 grain truck
    1962 7E-13D 4x4 rack truck
    1962 Champ pickup
    1962 GT Hawk 4 speed
    1964 Avanti R2 4 speed
    1964 Cruiser
    And various other "treasures"

    Leave a comment:


  • Euphman21
    Guest replied
    I am very much interested in the cab and the bed with two reservations. In order of importance, they are: 1) how much rust and 2)How much cost?

    Thank you.

    Leave a comment:


  • Guido
    replied
    If that doesn't work, I have a cab with doors as well as a short bed, but they are located in Va., so it falls outside the 1000 mile radius. However, I might be able to get them to Vern's on a backhaul.

    Guido Salvage - "Where rust is beautiful"

    1946 M-16 fire truck
    1948 M-16 grain truck
    1949 2R16A grain truck
    1949 2R17A fire truck
    1955 E-38 grain truck
    1957 3E-40 flatbed
    1961 6E-28 grain truck
    1962 7E-13D 4x4 rack truck
    1962 Champ pickup
    1962 GT Hawk 4 speed
    1964 Avanti R2 4 speed
    1964 Cruiser
    And various other "treasures"

    Leave a comment:


  • Euphman21
    Guest replied
    Thanks Guido, I will do that.

    Ezra

    Leave a comment:


  • Guido
    replied
    Check with Vern Ediger. He had a set of front fenders when I spoke to him last week. He is in Halstead, KS and can be reached during the week at 316-830-2271.

    Guido Salvage - "Where rust is beautiful"

    1946 M-16 fire truck
    1948 M-16 grain truck
    1949 2R16A grain truck
    1949 2R17A fire truck
    1955 E-38 grain truck
    1957 3E-40 flatbed
    1961 6E-28 grain truck
    1962 7E-13D 4x4 rack truck
    1962 Champ pickup
    1962 GT Hawk 4 speed
    1964 Avanti R2 4 speed
    1964 Cruiser
    And various other "treasures"

    Leave a comment:


  • Euphman21
    Guest started a topic Looking for information on any 2R truck body parts

    Looking for information on any 2R truck body parts

    On the lookout for [u]any and all</u> 2R truck (and any of the later models that will fit) body parts/sheet metal within a 1000 mile radius of San Antonio, TX. If it can be shipped for less than $100, then I don't care where it comes from. Thanks in advance for your help.

    Ezra
Working...
X