64 Hawk tranny conversion

[studee64]

Try it again...the parts don't match up...can someone advise where we went wrong
Still working on getting the pics the best size..
Thanks

Barry Leppan
Burlington, Ont. Canada
64 Daytona HT 5-spd
64 GT Hawk R-1/AC/Powershift

[dallastx75208]

Try what again? I am having a T-5 Mustang 5 speed put in my Hawk. Not sure what you are doing.

quote:Originally posted by studee64

Try it again...the parts don't match up...can someone advise where we went wrong
Still working on getting the pics the best size..
Thanks

Barry Leppan
Burlington, Ont. Canada
64 Daytona HT 5-spd
64 GT Hawk R-1/AC/Powershift

[dallastx75208]

Try what again? I am having a T-5 Mustang 5 speed put in my Hawk. Not sure what you are doing.

quote:Originally posted by studee64

Try it again...the parts don't match up...can someone advise where we went wrong
Still working on getting the pics the best size..
Thanks

Barry Leppan
Burlington, Ont. Canada
64 Daytona HT 5-spd
64 GT Hawk R-1/AC/Powershift

[GTtim]

That can't be the right tower for a powershift Hawk, or the console is wrong. The rear side that is next to the console needs to be right next to the console, then there is a carpet piece that surrounds the tower and snaps to the console.

Tim K.
'64 R2 GT Hawk

[GTtim]

That can't be the right tower for a powershift Hawk, or the console is wrong. The rear side that is next to the console needs to be right next to the console, then there is a carpet piece that surrounds the tower and snaps to the console.

Tim K.
'64 R2 GT Hawk

[studee64]

Jon, I missed getting the pic in the first time, so 'try again'

I am installing a power shift in place of a 4 speed and the shifter tower should fit up to the console, which it doesn't, by several inches...I was led to believe the console and the tower are from a Hawk..but maybe not...it should be a flush fit as per the attached pic..

You will love the T-5...I replaced my T-10 with one in my 64 Daytona, with a 3:73 TT Dana 44 and it moves our really well, and the best part is about 2200 rpm at 70 mpg plus on the hwy .


Barry Leppan
Burlington, Ont. Canada
64 Daytona HT 5-spd
64 GT Hawk R-1/AC/Powershift

[studee64]

Jon, I missed getting the pic in the first time, so 'try again'

I am installing a power shift in place of a 4 speed and the shifter tower should fit up to the console, which it doesn't, by several inches...I was led to believe the console and the tower are from a Hawk..but maybe not...it should be a flush fit as per the attached pic..

You will love the T-5...I replaced my T-10 with one in my 64 Daytona, with a 3:73 TT Dana 44 and it moves our really well, and the best part is about 2200 rpm at 70 mpg plus on the hwy .


Barry Leppan
Burlington, Ont. Canada
64 Daytona HT 5-spd
64 GT Hawk R-1/AC/Powershift

[studee64]

Thanks Tim..

I think you are right!!...so now to find out which piece is the wrong piece...

Barry Leppan
Burlington, Ont. Canada
64 Daytona HT 5-spd
64 GT Hawk R-1/AC/Powershift

[studee64]

Thanks Tim..

I think you are right!!...so now to find out which piece is the wrong piece...

Barry Leppan
Burlington, Ont. Canada
64 Daytona HT 5-spd
64 GT Hawk R-1/AC/Powershift

[Blue 15G]

70 mpg on the highway? You should post this on the gas mileage thread. [}]

[Blue 15G]

70 mpg on the highway? You should post this on the gas mileage thread. [}]

[studee64]

I agree, but unfortunaely its a typo...should read 70 mph..not mpg !!

tks

Barry

Barry Leppan
Burlington, Ont. Canada
64 Daytona HT 5-spd
64 GT Hawk R-1/AC/Powershift

[studee64]

I agree, but unfortunaely its a typo...should read 70 mph..not mpg !!

tks

Barry

Barry Leppan
Burlington, Ont. Canada
64 Daytona HT 5-spd
64 GT Hawk R-1/AC/Powershift

[dustybob]

Barry, it appears that you may have a "Lark" type console. The front of the GT console slopes forward which matches the shift tower.
A factory power shift console will have snaps for the carpet. The parts book only has one part # for GT's other than color. Black is
1344936X11.

Dustybob

[dustybob]

Barry, it appears that you may have a "Lark" type console. The front of the GT console slopes forward which matches the shift tower.
A factory power shift console will have snaps for the carpet. The parts book only has one part # for GT's other than color. Black is
1344936X11.

Dustybob