62 Lark Daytona Interior

[Cus63]

Hello Everyone,
Looking for a supplier of seat & door card covers for a 62 Lark Daytona, hopefully someone is producing these, thanks Cus

[62champ]

You might have to get a piece at a time to make a complete interior. Even then, dying some of the pieces might be necessary. What is left of Studebaker's factory interior panels is held by Starlight Studebaker. Even then, to find a complete set of door cards and seat covers is going to be difficult. Good luck.

[StudeRich]

Someone here may have extra of some pieces Marcus, if you tell them the Seat Type, Material Type and Color needed to go with your Body Color.

[bezhawk]

Even new the 62 materials were inferior, and disintegrated very quickly. Studebaker had numerous complaints on the 62s. 63 and up materials were vastly improved .

[Cus63]

Thanks for the replies, my original interior was Taupe colour, front buckets. I have some front door cards that are blue, that the upholsterer's could match, but was hoping someone might be reproducing covers. First pic is what was in my car,

[StudeRich]

OK, so the second pic is what the design of the seats are supposed to look like, on someone's Automatic '62 Daytona ?
I think your best bet for getting them this decade, is have a Local Upholstery Shop re-create that design.

Since it appears that the Car does not have it's final paint, you can go ANY color now on that, to match or blend with the Interior Color.

[62champ]

My Daytona is still wearing its original interior, if you need detail photos of anything in particular.
















Factory photo from when the cars were new. Not sure of the color, but it was on the lighter side.

[showbizkid]

Geez, that's nice.

[Cus63]

My Daytona is still wearing its original interior, if you need detail photos of anything in particular.

That's Great, I'll definitely will get back to you on that. My original plan was to get the auto-upholsterer's to do , but thought I better ask the question, some cars do have covers, but probably only more popular models etc., having the front cards is a bonus, there's no rear cards, but I'll be able to cut the templates & they can copy from pics . Headliner, dash cover,
windlace is all no problem, but will be chasing a few bits & pieces along the way. I want to keep the car original to the build spec., so will be going with the Taupe, thanks Cus