58 Wagon

[studecoop]

Hi. I need a 58 wagon hood and drivers door belt line molding and door stainless trim. Could also use a passenger front door too. Anybody? I am near Portland, Or. Thanks. Chris

[StudeRich]

Hi. I need a 58 wagon hood and drivers door belt line molding and door stainless trim. Could also use a passenger front door too. Anybody? I am near Portland, Or. Thanks. Chris

Chris, there is a below the window Moulding on the doors and a Body Side Moulding 1321008 in the middle of the doors.
And the "Hood" is a complete Hood or a hood front Moulding?

A lot of the trim is Stainless, so I don't understand: "and door stainless trim".
All of it except a complete Hood, MAY be in stock New at S.I. (Pg. 104) and possibly others.

The Right Door and Hood will have to be Used.
Have you tried Jerry at Studebaker of Oregon?

https://studebakervendors.com

[studecoop]

Thanks Rich. The belt line molding below the window is pot metal, I need one of those. The trim in the center of the door is stainless. I need one of those. Both pieces are missing on my drivers door. Also I need a hood, with or without the front pot metal trim piece. A passenger side, front door would be great too. 😀😃😃😃😀😀 I'll check SI. Figured someone might be parting one out.

[Buzzard]

I would also contact Barry Hackney, Texas rebel.
Bill

[8E45E]

I believe the sedan front door trim is identical. Therefore, it does not have to be a station wagon if its from a 'good' parts car.

Craig

[BRUCESTUDE]

Chris- I think the door stainless is identical to ‘57 sedans. The door pieces I have are 45”, possibly for a 2 door. If these
work for you PM Me.
Bruce