Need a High Numbers Dana 44

[rockinhawk]

Do you want the whole thing? or just the gear set? I have a 4.27 carrier, ring gear and pinion that came out of Matthew's truck. NT


Neil Thornton
Hazlehurst, GA
'57 Silver Hawk
'56 Sky Hawk
'51 2R16 dump truck
Many others.

[rockinhawk]

Do you want the whole thing? or just the gear set? I have a 4.27 carrier, ring gear and pinion that came out of Matthew's truck. NT


Neil Thornton
Hazlehurst, GA
'57 Silver Hawk
'56 Sky Hawk
'51 2R16 dump truck
Many others.

[rockinhawk]

OOPs sorry it's not TT!! NT


Neil Thornton
Hazlehurst, GA
'57 Silver Hawk
'56 Sky Hawk
'51 2R16 dump truck
Many others.

[rockinhawk]

OOPs sorry it's not TT!! NT


Neil Thornton
Hazlehurst, GA
'57 Silver Hawk
'56 Sky Hawk
'51 2R16 dump truck
Many others.

[Sonny]

quote:Originally posted by rockinhawk

Do you want the whole thing? or just the gear set? I have a 4.27 carrier, ring gear and pinion that came out of Matthew's truck. NT

[b]
Neil Thornton

I'd like to find a complete unit Neil. However, I'm not getting too many positive hits for a complete unit. It may be harder than I thought. Please keep me in mind, I may have to piece one together. PLUS, having backup gear sets is always a good thing.

Thanks a million Neil. I really appreciate it!

Sonny
http://RacingStudebakers.com

[Sonny]

quote:Originally posted by rockinhawk

Do you want the whole thing? or just the gear set? I have a 4.27 carrier, ring gear and pinion that came out of Matthew's truck. NT

[b]
Neil Thornton

I'd like to find a complete unit Neil. However, I'm not getting too many positive hits for a complete unit. It may be harder than I thought. Please keep me in mind, I may have to piece one together. PLUS, having backup gear sets is always a good thing.

Thanks a million Neil. I really appreciate it!

Sonny
http://RacingStudebakers.com

[studebaker-R2-4-me]

Sonny,

I came across a 4.09 TT out of an Avanti a couple of weeks ago. Tapered axles, no end plates. I've decided it's too low for me at this time. If I had a car trailer and a 3/4 ton truck I would have snapped it up for Stanton PSMCDR in September. You may want a lower ratio for your Drag car. If you're interested I'll put you in touch with the guy.

Allen



1964 GT Hawk R2 Clone
Oakville, Ontario.

Hamilton Chapter
See you at Niagara 2008 Crossroads Zone Meet July 18-20

[studebaker-R2-4-me]

Sonny,

I came across a 4.09 TT out of an Avanti a couple of weeks ago. Tapered axles, no end plates. I've decided it's too low for me at this time. If I had a car trailer and a 3/4 ton truck I would have snapped it up for Stanton PSMCDR in September. You may want a lower ratio for your Drag car. If you're interested I'll put you in touch with the guy.

Allen



1964 GT Hawk R2 Clone
Oakville, Ontario.

Hamilton Chapter
See you at Niagara 2008 Crossroads Zone Meet July 18-20

[Sonny]

quote:Originally posted by studebaker-R2-4-me

Sonny,

I came across a 4.09 TT out of an Avanti a couple of weeks ago. Tapered axles, no end plates. I've decided it's too low for me at this time. If I had a car trailer and a 3/4 ton truck I would have snapped it up for Stanton PSMCDR in September. You may want a lower ratio for your Drag car. If you're interested I'll put you in touch with the guy.

Allen



1964 GT Hawk R2 Clone
Oakville, Ontario.

Hamilton Chapter
See you at Niagara 2008 Crossroads Zone Meet July 18-20

Heck, that's the carrier I need, (4.09-up), and it's a great start. I would greatly appreciate it if you could please get me in touch with the guy Allen. I have some help available "up that-a way" to retrieve it.

Thanks a million in advance Allen!


Sonny
http://RacingStudebakers.com

[Sonny]

quote:Originally posted by studebaker-R2-4-me

Sonny,

I came across a 4.09 TT out of an Avanti a couple of weeks ago. Tapered axles, no end plates. I've decided it's too low for me at this time. If I had a car trailer and a 3/4 ton truck I would have snapped it up for Stanton PSMCDR in September. You may want a lower ratio for your Drag car. If you're interested I'll put you in touch with the guy.

Allen



1964 GT Hawk R2 Clone
Oakville, Ontario.

Hamilton Chapter
See you at Niagara 2008 Crossroads Zone Meet July 18-20

Heck, that's the carrier I need, (4.09-up), and it's a great start. I would greatly appreciate it if you could please get me in touch with the guy Allen. I have some help available "up that-a way" to retrieve it.

Thanks a million in advance Allen!


Sonny
http://RacingStudebakers.com

[studebaker-R2-4-me]

Sonny,

I am interested in a 3.54:1 TT. That sounds like an all round good ratio to me. It'll help me spin those tires and give me a good cruising RPM down the highway. The email has been sent to the gentleman

Allen





1964 GT Hawk R2 Clone
Oakville, Ontario.

Hamilton Chapter
See you at Niagara 2008 Crossroads Zone Meet July 18-20

[studebaker-R2-4-me]

Sonny,

I am interested in a 3.54:1 TT. That sounds like an all round good ratio to me. It'll help me spin those tires and give me a good cruising RPM down the highway. The email has been sent to the gentleman

Allen





1964 GT Hawk R2 Clone
Oakville, Ontario.

Hamilton Chapter
See you at Niagara 2008 Crossroads Zone Meet July 18-20

[ChampTrucking]

Hey Sonny,try Rich LaTorre(amnotR2) who posts on the Stude NG.I seem to remember he had a 427 ratio 44 he wanted to off,but I cannot remember if it was a TT or not.He had 2 rearends taking up space in his garage.Email me off Forum and I can pass on a message to him.Thanks...Rich

[ChampTrucking]

Hey Sonny,try Rich LaTorre(amnotR2) who posts on the Stude NG.I seem to remember he had a 427 ratio 44 he wanted to off,but I cannot remember if it was a TT or not.He had 2 rearends taking up space in his garage.Email me off Forum and I can pass on a message to him.Thanks...Rich

[Sonny]

quote:Originally posted by studebaker-R2-4-me

Sonny,

I am interested in a 3.54:1 TT. That sounds like an all round good ratio to me. It'll help me spin those tires and give me a good cruising RPM down the highway. The email has been sent to the gentleman

Allen



1964 GT Hawk R2 Clone
Oakville, Ontario.

Hamilton Chapter
See you at Niagara 2008 Crossroads Zone Meet July 18-20

Great! Thanks Allen!

Sonny
http://RacingStudebakers.com