Anyone have an AC-2705 third horn as used on 1955 cars and trucks?

[Skip Lackie]

Am looking for a loan, picture, or just measurements of the support bracket (#536784) used on the rare accessory third horn available on 1955 President cars and E-series trucks. Or would buy if someone has one.

[64studeavanti]

I can get a picture tomorrow if no one else beats me to it.

[58 Hawk]

Sip, I have the exact horn the Speedster or other 55 models 3-D Booster horn it was totally restored but it lacks the mechanical parts under the cover. the horn has the exact bracket on it and I will sell the horn
Joe Parsons email me at jobetsy6@gmail.com or call me at 330 502 5930
I can send you a photo

[Skip Lackie]

Joe-
Sent you an email.

Henry-
Thanks for the offer. Will let you know if I need the photo.

Do either of you have a copy of the mounting instructions for this horn?

[Skip Lackie]

Joe-
Email to you bounced as undeliverable.

[58 Hawk]

Skip my email is joebetsy6@gmail.com the horn I have has the bracket on it and it fits directly under the horizontal bar with the gold S on it ...the horn will bit into the undeside of the bar with two bolts into the underside of the bar in grille VERY EASY INSTALLATION LIKE 2 MINUTES I can tell you where the wiring goes for the horn too
Joe Parsons cell 330 502 5930

[Skip Lackie]

After talking to Joe Parsons yesterday, I realized that I: (1) Needed to explain further, and (2) Had copied the wrong part number in my first message anyway. I have changed that part number to the correct one.

The AC-2705 was offered as an accessory horn for the 1955 cars and trucks. Apparently installing the horn in trucks required an additional support bracket -- #536784. That is the item I am looking for. Joe said that this part is not needed for installation on the 1955 cars. I assume that support part was included in the accessory kit, but was discarded when the horn was installed on a car. So I will expand my request. I am looking for: (1) #536784 support, or (2) A drawing or photo of that item, or (3) A copy of the instructions for the AC-2705 horn kit, or (4) A complete AC-2705 horn kit, if it contains the above support.

Thanks to those that responded, but would like to start over with correct info.