Engine: Does anyone know the part number for this engine bracket?

[Never Enough Studebakers]

This is for a 259 or 289 engine.

[bezhawk]

I have a couple if you need one.

[rbisacca]

532404 as illustrated on page 8 of your 1959-1964 Chassis Parts Catalog

[Studebakercenteroforegon]

532404 as illustrated on page 8 of your 1959-1964 Chassis Parts Catalog

No, the part pictured is clearly a truck part and the part number you state is for passenger cars.

[Studebakercenteroforegon]

Not knowing the year of truck pictured....but E thru 4E used 684470 Bracket, same right and left.
5E thru 8E used 1692174 right, 1692175 left.

[rbisacca]

No, the part pictured is clearly a truck part and the part number you state is for passenger cars.

I just checked my Champ PU. Truck brackets are much taller. Therefore, part pictured is NOT clearly a truck part. It would have been nice if Jim had stated on what vehicle part was photo'd. But since he didn't and since he has a '62 Hawk and a '63 Avanti, photo is probably of one of those.

[doofus]

Look at the biscuits, it sit's on the frame, not a car frame bracket. that is a truck setup. Luck Doofus

[Never Enough Studebakers]

Don’t go by the frame. Only go by the bracket in the photo. I believe the engine was pulled from a car and dropped in a C-cab. The E series brackets are larger.

[(S)]

(1951 Commander)

[Alan]

529342 is the part # you are looking for.

[bezhawk]

Yep, I have two. Like I mentioned in post #2 if you want them, If you just want the part number then, well, you have that now too.

[rbisacca]

529342 is the part # you are looking for.

PN 529342 is used on 232 engine. Jim requested PN for 259 & 289 engine.

[Alan]

In 60 years of working on Studes I have never been able to tell the difference between a 224-232-259-289 by looking at just the motor mounts.

[64Avanti]

In 60 years of working on Studes I have never been able to tell the difference between a 224-232-259-289 by looking at just the motor mounts.

Alan, I had to laugh at that one. If you figure it out let me know.