Power steering belt broke. Steering is easier now. Huh?

[FunkyWilly]

I was at a car show yesterday with my 1962 Gran Turismo Hawk and a guy says to me "there's a fan belt under your car." I checked and found this...

[Tcgoesch]

I want to rebuild the power steering pump on my '64 Avanti. I have it off of the car and now I cannot get the pulley to budge. I have resisted putting...

[Ira]

I have a 60 Hawk and am looking for instructions/schematic to mount the power steering.
thanks
Ira

[64GTHawk]

My 64 Hawk has just started gushing power steering fluid, emptying the reservoir after only a mile of driving.

I haven't been able to...

[tsehisht]

Hi from Israel, I have now in my shop a 1951 commander land cruiser that I need to find a way to install power steering on it.
does someone here...

[Merto]

I rebuilt my power steering pump and the actuator. I did not rebuild the piston. The power steering worked intermittenly and then stopped working...

[Ted Johnson]

How does one get at the fitting on the control valve to remove the old return hose from the reservoir to replace it? One cannot get a 5/8" wrench...

[Ted Johnson]

In my '62 Hawk GT with apparently original Power Steering, I have developed a leak. It drip-drip-drips from the bracket and nut at on the control valve,...

[Matthew Wendt]

I have a 62 Lark Daytona Convertible with power steering.

It turns sharper to the left than right. I have adjusted the reach rod out as

[John Thomas]

Earlier this year before I purchased the car the previous owner had a lot of work done at a local classic car shop. They replaced the two main power steering...

[dstreb]

I have a '63 Avanti R2 I'd love to drive! I need to have my power steering control valve rebuilt (I got the kit from Dave Thibault) and I need to have...

[dnevin]

Installing the bendix power-assisted steering system from a 64 Hawk on my 53 Champion Coupe. It looks like I need to drill holes in the frame to mount...

[Dudorino]

I took my 57 Hawk into the shop for a once over. Trying to be helpful, they filled the power steering system with power steering fluid instead of the...

[studejack]

Steer & Gear of Columbus, Ohio, rebuilt the Saginaw power steering unit on my 1956 President Classic. I had tried rebuilding it myself and had trouble...

I have a restored 1959 4E series truck. I would like to add power steering. Kits are made for Ford, Chevy, etc. Does anyone have any experience with...