17 results in 0.0134 seconds.
-
'53 2R17A rear brake service/stuck drum part 1.
We tackled a rear drum on my 2R17 today. With some help from a Truck Talk member, I got a good description of the process, it was not that clear what... -
2R truck wiper motor questions
I was working on the truck tonight ('52 2R17) and after I hooked up the vacuum hose to the wiper motor, to the port on the right side of the motor, I... -
2R climatizer fan switch
Working on a '52 2R17, I took the fan switch apart and cleaned out the debris collected and cleaned up the contacts. (Evidently, the area behind the chrome... -
2R climatizer color
Anyone find a spray paint color that's close to the original brown to paint the climatizer box in a 2R truck? I spent $15 for a can of original green... -
Electric fuel pump install questions
So, I got an Airtex fuel pump: http://www.summitracing.com/parts/atx-e8902/overview/, and I was laying out the fuel filter and fuel pump layout under... -
Gas tank sender wire.
On the 2R17 I'm working on, the wire from the gas tank was broken. Does that wire just go from there directly to the back of the fuel gauge? -
ATF in the manifolds
So, I've read numerous stories about putting X or Y fluid in the cylinders of a stuck or possibly stuck engine, but today pointed out to me I've never... -
Battery Spacer in Tray
I'm recently aware of two sizes of battery trays on some 2R trucks. What have owners done in trucks where the new battery doesn't fill the entire width... -
2R Truck engine mount replacement
So, what says the group mind as to whether the intermediate shaft and clutch pedal has to be unbolted from the frame in order to lift the engine and trans... -
SUCCESS! Finally
2 days and over 3 hours trying, but I finally got bolt #4, Death, the last of the 4 oil pan Bolts of the Apocalypse in tonight! #%*@ If I do have to... -
Radiator Question
Will his 49 2R16A radiator fit in the frame for a 52 2R17A 245 engine? -
What?! Another gear oil question?
I went to get gear oil for the 2R17 I have and went with GL-4 in mind, but most of the oils I saw, especially the synthetics all stated the were GL-5... -
Shortening a 2R17
Don't freak, I'm just noodling the idea, after being advised that lopping 4' off the back of a 2R17 might not be the best course of action and shortening... -
Generator mounting hole
So, the bolt on my generator, at the back, underneath, was not tightened for some time and now the mounting hole is about 1/4" out of round. Is... -
Engine # question reminds me
Were there any sorts of records kept with the clover block motors that SI has that would tell me anything about when or where a clover block motor was...