Announcement

Collapse
No announcement yet.

Not having any fun!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    I have for years used a variation of the acetylene torch approach. Heat them red hot and walk away until they are stone cold. Then go back and usually they will be loose. May have to libricate after the initial turn or two. GP

    Comment


    • #17
      You can always weld a bolt to the top and use a socket to get it out. I have done that on broken exhaust bolts

      "Spilling a beer is the adult equivalent of a kid letting go of a Balloon."

      Comment

      Working...
      X