Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

'63 Avanti Window regulators

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Body: '63 Avanti Window regulators

    I'm in need of window regulators for my '63 Avanti. Manual roll-up, not power. As long as things are apart I may as well go with "new" rollers & springs. I didn't see anything listed in SI for replacement for the '63. Any advice or any resource would be most welcome.
    Thanks in advance.
    "Every man I meet on the street is superior to me in some respect, and from that I can learn."
    R.W. Emerson

  • #2
    I believe that you will have a difficult time trying to locate NOS Avanti regulators.

    What is wrong with yours? I believe in repairing them. If the gear is bad, replace it with one from another regulator. If the sector is bad/worn, build it up with braze and file/grind it to the proper shape. If it is just a general looseness, tighten everything up.
    Gary L.
    Wappinger, NY

    SDC member since 1968
    Studebaker enthusiast much longer

    Comment


    • #3
      We only talked about that recently. Here's the link.
      http://forum.studebakerdriversclub.c...gulator-repair
      pb

      Comment


      • #4
        I'm sending what I have to Dan Booth in hopes that he can rebuild the regulators & locate suitable replacement hardware. I'll let you know how this progresses
        "Every man I meet on the street is superior to me in some respect, and from that I can learn."
        R.W. Emerson

        Comment

        Working...
        X