Hawk taillight assembly question

[valleyguy]

Does anyone know if there is a page in the manual (I can't find one), that shows an exploded view of the taillight housing assembly and related parts? I (shame shame) forgot to label these when
I disassembled them and now.....looking for correct reassembly.
Thannks,

[JDP]

Best bet is the chassis parts book, electrical section, or just ask here.


Studebaker On The Net
http://stude.com
Studebaker News Group
http://groups.google.com/group/alt.autos.studebaker
Arnold Md.
64 Daytona HT
63 R2 4 speed GT Hawk
63 GT Hawk
63 Avanti R1/AC
63 Avanti R2 (Sold)
63 Daytona HT
63 Lark 2 dr.
62 Lark 2 door
60 Lark convert
60 Hawk
57 Silver Hawk
53 Starliner
51 Commander

[hank63]

Not many parts in a Hawk tail light -
- One-piece body, attached to fender with 3 screws
- 2 lenses, attached with 3 + 2 screws
- one twin filament bulb (top), one single filament bulb (bottom)
- 2 gaskets, lens-to-body
At least, there should be 2 gaskets. As luck has it, I looked at mine today (63 Hawk), over the years the gaskets have become hard particles, some stuck to the lenses, some stuck to the bodies and some just loose dust.
3 cables to connect, that's it.
/H