Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

Question about 1961-62 Lark front windshield rubbers

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Body: Question about 1961-62 Lark front windshield rubbers

    We have had a few problems with the reproduction 1961-62 Lark windshield rubbers. These have two moulded corners, and I believe the originals did too. My question is do the moulded corners go to the bottom of the glass (lower pillar corner) or the top of the glass (where the right angle joiner moulds are)? There seems to be some debate as to what is correct as neither way seems to seal very well.

    Chris.

  • #2
    Looks like I have found a great trivia question.....88 page views but nobody knows!!

    Chris.

    Comment


    • #3
      Okay then...the molded corners are at the top.

      Comment


      • #4
        That's what I thought, but according to SI they go to the bottom!! Either way, they leak.......

        Comment

        Working...
        X