Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

Headliner Source

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Interior: Headliner Source

    I am looking for a new headliner and the wind lace trim around the doors on my 47 Champion 4 door. Who has the best price and easiest to install headliner?

    Thanks

    Neil
    Last edited by avantibngrant; 07-26-2014, 05:03 AM.

  • #2
    Assume you mean 3-passenger (business) coupe! I'm unaware of any 3-door Champions.
    Either the cheapest or the most expensive are going to be identical PITA's to install.
    If you want cheap, why not pick a material and sew it yourself? It's not that hard and, as I said, nothing is going to be any easier than anything else.
    Is your old headliner still somewhat there? Use it as a pattern. It's all straight stitching.
    "All attempts to 'rise above the issue' are simply an excuse to avoid it profitably." --Dick Gregory

    Brad Johnson, SDC since 1975, ASC since 1990
    Pine Grove Mills, Pa.
    sigpic'33 Rockne 10, '51 Commander Starlight, '53 Commander Starlight "Désirée"

    Comment


    • #3
      Bill Jarvis

      Comment


      • #4
        Originally posted by rockne10 View Post
        Assume you mean 3-passenger (business) coupe! I'm unaware of any 3-door Champions.
        Either the cheapest or the most expensive are going to be identical PITA's to install.
        If you want cheap, why not pick a material and sew it yourself? It's not that hard and, as I said, nothing is going to be any easier than anything else.
        Is your old headliner still somewhat there? Use it as a pattern. It's all straight stitching.
        I just fixed it. 4 door I meant. I will probably look at Loga enterprises. Anyone used their headliner of this vintage?

        Regards

        Neil

        Comment

        Working...
        X