Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

Looking for picture of how the brake light switch mounts to the parking brake 1965/66 cars

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Interior: Looking for picture of how the brake light switch mounts to the parking brake 1965/66 cars

    I am looking for a picture of how the brake light switch mounts to the parking brake arm on 1965/66 cars. Have the factory switch. Light is there but no switch or wiring.

    Thanks in advance!

    Mark
    aka Bullet

  • #2
    I don't have a picture Mark but on the top of the parking brake assy you'll see a point where there's a hole about 1/4". This is where the switch mounts with the plunger facing down onto the parking brake "arm" so that when it is pushed down, the plunger on the switch extends & the light goes on. Hope this helps.
    59 Lark wagon, now V-8, H.D. auto!
    60 Lark convertible V-8 auto
    61 Champ 1/2 ton 4 speed
    62 Champ 3/4 ton 5 speed o/drive
    62 Champ 3/4 ton auto
    62 Daytona convertible V-8 4 speed & 62 Cruiser, auto.
    63 G.T. Hawk R-2,4 speed
    63 Avanti (2) R-1 auto
    64 Zip Van
    66 Daytona Sport Sedan(327)V-8 4 speed
    66 Cruiser V-8 auto

    Comment


    • #3
      Click image for larger version

Name:	IMG_2699.jpg
Views:	2
Size:	70.7 KB
ID:	1690884 Here is my '66 Cruiser's Parking Brake Light switch.
      This has been asked before but I can't find the post with this Pic.
      StudeRich
      Second Generation Stude Driver,
      Proud '54 Starliner Owner

      Comment


      • #4
        Originally posted by StudeRich View Post
        [ATTACH=CONFIG]35409[/ATTACH] Here is my '66 Cruiser's Parking Brake Light switch.
        This has been asked before but I can't find the post with this Pic.
        Found the thread here: http://forum.studebakerdriversclub.c...ke-lamp-switch
        sigpic

        Comment


        • #5
          Thank you Warren and StudeRich. Both will help!

          I will try it tomorrow.

          Mark
          aka Bullet

          Comment


          • #6
            Holes are right where you said and line up with the bracket I got, so on course!

            Thank you!

            Mark

            Comment

            Working...
            X