Announcement

Collapse
No announcement yet.

Wanted - T10 Studebaker input shaft

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • PackardV8
    replied
    Thanks, Rich and Frank. Guess I could be in the market for a Chevy pattern bell housing as an option.

    thnx, jv.

    PackardV8

    Leave a comment:


  • StudeRich
    replied
    Mid year 1962 would be when the change was made to Ford case, making it possible to use the common '57 to '64 3 speed Bellhousing instead of the SPECIAL '61 -early '62 Chevy case pattern bell housing, with the lower right hand bolt way outboard.

    quote:Originally posted by 41 Frank

    Jack, the Chevy bolt pattern T10 was used in 61 and 62
    StudeRich
    Studebakers Northwest
    Ferndale, WA

    Leave a comment:


  • fmarshall
    replied
    Here you go:

    http://cgi.ebay.com/ebaymotors/STUDE...spagenameZWDVW

    ========================
    63 Avanti R2, 4-Speed, 3.73 TT
    Martinez, CA

    Leave a comment:


  • 41 Frank
    replied
    Jack, the Chevy bolt pattern T10 was used in 61 and 62

    Leave a comment:


  • PackardV8
    started a topic Wanted - T10 Studebaker input shaft

    Wanted - T10 Studebaker input shaft

    Greetings,All,

    I am considering converting a Chevy T10 to Studebaker and need a Studebaker 2.54 first gear input shaft, parts tranny or complete unit.

    Also, am I correct in that Studebaker used the Chevy bolt-pattern T10 only in 1961 and went back to the Stude/Ford bolt-pattern on T10s from '62-64?

    thnx, jack vines

    PackardV8
Working...
X