Announcement

Collapse
No announcement yet.

Heat Riser Position??

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Exhaust: Heat Riser Position??

    As far as the heat riser goes what is the position for it to be fully open? Turned clockwise all the way or counter-clockwise? Mine has the half circle weight with the "nub" pointing in the center, facing forward that either points up or down on full travel. It is free in between but binds up at either end so I need to fix it in the fully open position.
    59 Lark wagon, now V-8, H.D. auto!
    60 Lark convertible V-8 auto
    61 Champ 1/2 ton 4 speed
    62 Champ 3/4 ton 5 speed o/drive
    62 Champ 3/4 ton auto
    62 Daytona convertible V-8 4 speed & 62 Cruiser, auto.
    63 G.T. Hawk R-2,4 speed
    63 Avanti (2) R-1 auto
    64 Zip Van
    66 Daytona Sport Sedan(327)V-8 4 speed
    66 Cruiser V-8 auto

  • #2
    I "thought" I answered this one for you on another post, but Clockwise pointing Forward is OPEN, the weight falls from upright to forward when installed correctly with the "TOP" marking facing UP.
    Last edited by StudeRich; 02-18-2014, 08:41 PM.
    StudeRich
    Second Generation Stude Driver,
    Proud '54 Starliner Owner

    Comment


    • #3
      Thanks Rich. That's what I needed to know-full clockwise.
      59 Lark wagon, now V-8, H.D. auto!
      60 Lark convertible V-8 auto
      61 Champ 1/2 ton 4 speed
      62 Champ 3/4 ton 5 speed o/drive
      62 Champ 3/4 ton auto
      62 Daytona convertible V-8 4 speed & 62 Cruiser, auto.
      63 G.T. Hawk R-2,4 speed
      63 Avanti (2) R-1 auto
      64 Zip Van
      66 Daytona Sport Sedan(327)V-8 4 speed
      66 Cruiser V-8 auto

      Comment

      Working...
      X