Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

50 champion tie rod ends

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Steering: 50 champion tie rod ends

    Can anyone tell me the part number for a 50 champion tie rod end with RH threads? I have the king pins from the 50 land cruiser installed on my champion, everything fits except the tie rods. I have to fabricate rods with a cruiser end at the wheel and a champion end on the inside. I can shorten the cruiser tie rods and thread the inside end but I can only get a RH thread tap. As an alternate I thought about inlarging the holes on the inside but don't know how to drill a tapered hole. Also does anyone know if the rod ends from an eariler model has the same size tapered section? I can work with about any size threaded end as long as it is a RH thread. Thanks
    sigpic
    Barn Find
    1950 Champion
    Before I started
    Jim Berry
    Midlothian, TX
Working...
X