Announcement

Collapse
No announcement yet.

Looking for a good Hill Holder....

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 64V-K7
    replied
    If anyone has a hill holder for a stick shift Speedster, please contact
    BillBergo@aol.com


    thx

    Leave a comment:


  • 64V-K7
    replied
    Originally posted by Mike Van Veghten View Post
    Bob -

    You haven't answered the above questions..! "Bump .. .. .." isn't an answer.

    Mike

    Look above the "bump"... 55 Speedster.... T-10 four speed (I just edited the initial post)

    Leave a comment:


  • Mike Van Veghten
    replied
    Bob -

    You haven't answered the above questions..! "Bump .. .. .." isn't an answer.

    Mike

    Leave a comment:


  • brian6373
    replied
    I think for manual trans they're all the same valve, the linkage is where the difference is for year, model, and trans/shifter. I have three valves, one from the early 50's, one I don't know, and a complete kit for '63 Lark. The casting #'s are the same.

    Leave a comment:


  • 64V-K7
    replied
    Bump! .. .. .. .. .. ..

    Leave a comment:


  • StudeRich
    replied
    Also needed info is whether this is for a Coupe/Hardtop or a Sedan/Wagon.

    Leave a comment:


  • jclary
    replied
    You will need to clarify whether or not you have a manual or automatic transmission. The automatics use the electrical actuated "no-roll" assembly and the manual transmission equipped cars use the mechanical.

    Leave a comment:


  • 64V-K7
    started a topic Brakes: Looking for a good Hill Holder....

    Looking for a good Hill Holder....

    ........and linkage to use on a 55 President.. Anything out there ?

    thx

    I should have known to do that, (mea culpa) .
    55 Speedster, with a T-10 four speed....
    Last edited by 64V-K7; 06-20-2013, 05:31 PM. Reason: brevity
Working...
X