Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

Laser time

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Laser time

    I'll have some time on the laser tomorrow and Friday. Any requests? I've got a hawk, but need some input on how big to make it. Let me know

    Jim

    1966 Avanti II RQA 0088
    Jim
    Often in error, never in doubt
    http://rabidsnailracing.blogspot.com/

    ____1966 Avanti II RQA 0088_______________1963 Avanti R2 63R3152____________http://rabidsnailracing.blogspot.com/

  • #2
    I vote 6 feet.

    Robert (Bob) Andrews Owner- IoMT (Island of Misfit Toys!)
    Parish, central NY 13131
    http://www.cardomain.com/ride/2358680/1

    Comment


    • #3
      Sorry about that. The original post left out the pic. It should be there now.
      Also, somehow I cross posted this here. It was supposed to be on only the General Forum. Sorry guys.
      Jim

      1966 Avanti II RQA 0088
      Jim
      Often in error, never in doubt
      http://rabidsnailracing.blogspot.com/

      ____1966 Avanti II RQA 0088_______________1963 Avanti R2 63R3152____________http://rabidsnailracing.blogspot.com/

      Comment


      • #4
        Here's another one I whipped up to try.



        Jim

        1966 Avanti II RQA 0088
        Jim
        Often in error, never in doubt
        http://rabidsnailracing.blogspot.com/

        ____1966 Avanti II RQA 0088_______________1963 Avanti R2 63R3152____________http://rabidsnailracing.blogspot.com/

        Comment


        • #5
          Here are the first cuts, unpolished in 14ga stainless.



          Jim

          1966 Avanti II RQA 0088
          Jim
          Often in error, never in doubt
          http://rabidsnailracing.blogspot.com/

          ____1966 Avanti II RQA 0088_______________1963 Avanti R2 63R3152____________http://rabidsnailracing.blogspot.com/

          Comment


          • #6
            Cool!! How about that Avanti hood "buckle" thing on the leading edge?
            Mine is OK looking, I have considered an aluminum one, polished and
            clear coated like an aftermarket wheel. But thats more than a cutout
            so it would require some serious work. You can see it on the front of
            my Avanti in this picture :



            Tom
            '63 Avanti R1, '03 Mustang Cobra 13" front disc/98 GT rear brakes, 03 Cobra 17" wheels, GM alt, 97 Z28 leather seats, TKO 5-spd, Ported heads w/SST full flow valves.
            Check out my disc brake adapters to install 1994-2004 Mustang disc brakes on your Studebaker!!
            http://forum.studebakerdriversclub.c...bracket-update
            I have also written many TECH how to articles, do a search for my Forum name to find them

            Comment

            Working...
            X