Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

gasket set

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Engine: gasket set

    I've found a place that sells complete fel-pro gasket sets for the studie v8's for $135. Is this a good price ? Thinking I should order one or two.

  • #2
    I know you stated that the set is 'complete', but make sure it does include the crankshaft rear seal.

    RockAuto.com is showing the Felpro FS7669S2 for $126.
    Paul
    Winston-Salem, NC
    Visit The Studebaker Skytop Registry website at: www.studebakerskytop.com

    Comment


    • #3
      Fel Pro sets no longer include the valve cover grommets and a lot of the smaller gaskets they included in the past.
      American iron, real old school
      With two tone paint, it sure is cool

      Its got 8 cylinders and uses them all
      With an overdrive that just won't stall

      With a 4 barrel carb and dual exhausts
      With 4.23 gears it can really get lost

      Its got safety belts and I ain't scared
      The brakes are good and the tires are fair.

      Tried to sell her, but got no taker
      I"ll just keep driving my Studebaker

      Comment


      • #4
        Since Felpro no longer markets complete Studebaker overhaul gasket sets they are now sold by our vendor wholesaler to us vendors in several boxes taped together to make a complete set. In other words, separate pan gasket set, separate rear main seal,separate valve cover grommets, etc. If you have found a complete set of gaskets for that price you are one lucky guy!
        Last edited by 41 Frank; 05-20-2012, 03:07 PM.
        Frank van Doorn
        Omaha, Ne.
        1962 GT Hawk 289 4 speed
        1941 Champion streetrod, R-2 Powered, GM 200-4R trans.
        1952 V-8 232 Commander State "Starliner" hardtop OD

        Comment


        • #5
          I got a pretty complete set at NAPA for a 259 V8. I needed to get the valve cover grommets from SI but everything else was there. About $65.00.

          Comment


          • #6
            Doublepaddle, do you have a Napa PN # for the gasket set??

            Comment


            • #7
              I cannot find the slip for the gasket set from NAPA. You can try HS76695-2 ..........Do not know if that is the one. They have me listed as a 3E7 4.2 L 259 CID V8 if that helps. The parts man is also my mechanic so I do get a good discount. He got the gasket set himself and I may not have gotten a slip .

              Comment


              • #8
                Thank you, and good luck with your rebuild.

                Comment

                Working...
                X