Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

Fuel pump check valves (Carter R1) needed

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Fuel pump check valves (Carter R1) needed

    Where can I find two of these? I probably also need new springs. They are no longer holding the fuel.

  • #2
    I got the kit from S.I.

    Its really a shame that SDC doesnt believe in using stickys, and the
    need to transfer good tech articles to a sub-forum within Tech Talk,
    so that people could more easily find stuff.

    My "how to" tech article .. buried on page 30.[B)]

    http://www.studebakerdriversclub.com...?TOPIC_ID=5982

    Tom

    '63 Avanti, zinc plated drilled & slotted 03 Mustang Cobra 13" front disc/98 GT rear brakes, 03 Cobra 17" wheels, GM alt, 97 Z28 leather seats, soon: 97 Z28 T-56 6-spd, Ported heads w/SST full flow valves, 'R3' 276 cam, Edelbrock AFB Carb, GM HEI distributor, 8.8mm plug wires
    '63 Avanti R1, '03 Mustang Cobra 13" front disc/98 GT rear brakes, 03 Cobra 17" wheels, GM alt, 97 Z28 leather seats, TKO 5-spd, Ported heads w/SST full flow valves.
    Check out my disc brake adapters to install 1994-2004 Mustang disc brakes on your Studebaker!!
    http://forum.studebakerdriversclub.c...bracket-update
    I have also written many TECH how to articles, do a search for my Forum name to find them

    Comment

    Working...
    X