Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

Headliner Installation

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Headliner Installation

    My non-original fell down. I want to install the new-type two piece fiberglass headliner. Does anyone have any tips on how to install the headliner? Did you have any problems installing it? I have a '64 Avanti.

    Thank you in advance,

    Lenny

  • #2
    I second this question. My original bows the wrong way, and made the
    car only driveable for a 4 foot tall person, I removed it. The two
    piece fiberglass sounds VERY tempting. Especially if I plan on winning
    the catagory next year!!

    Tom
    '63 Avanti R1, '03 Mustang Cobra 13" front disc/98 GT rear brakes, 03 Cobra 17" wheels, GM alt, 97 Z28 leather seats, TKO 5-spd, Ported heads w/SST full flow valves.
    Check out my disc brake adapters to install 1994-2004 Mustang disc brakes on your Studebaker!!
    http://forum.studebakerdriversclub.c...bracket-update
    I have also written many TECH how to articles, do a search for my Forum name to find them

    Comment


    • #3
      It's not rocket science, it installs using the same instructions in the shop manual as the stock one.


      Studebaker On The Net
      http://stude.com
      Studebaker News Group
      http://groups.google.com/group/alt.autos.studebaker
      Arnold Md.
      65 Sports Sedan(sold)
      64 Daytona HT
      63 R2 4 speed GT Hawk
      63 GT Hawk
      63 Avanti R1/AC
      63 Avanti R2/4 speed
      63 Daytona HT
      63 Lark 2 dr.
      62 Lark 2 door
      62 GT(parts car)
      60 Lark convert
      60 Hawk
      52 Starliner(sold)
      51 Commander
      JDP Maryland

      Comment


      • #4
        JDP .. you are st .. st .. stuttering. Thanks for the reply, I think
        that I could have figured it out, I was looking for any tips that are
        handy, like adding sound deadener or something. Considering that I
        have designed my own brake setup, simply swapping headliner should go
        fairly easily ...... the seat swap did.

        Tom
        '63 Avanti R1, '03 Mustang Cobra 13" front disc/98 GT rear brakes, 03 Cobra 17" wheels, GM alt, 97 Z28 leather seats, TKO 5-spd, Ported heads w/SST full flow valves.
        Check out my disc brake adapters to install 1994-2004 Mustang disc brakes on your Studebaker!!
        http://forum.studebakerdriversclub.c...bracket-update
        I have also written many TECH how to articles, do a search for my Forum name to find them

        Comment

        Working...
        X