Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

trans mount hawk v8

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • trans mount hawk v8

    How do I tell left mount from right mount on the bell housing?[8D]

    Studebakers forever!
    Studebakers forever!

  • #2
    I never saw a 1/2 inch spacer, where can I get another , what's it's purpose?

    Studebakers forever!
    Studebakers forever!

    Comment


    • #3
      Oh Mr. Wizard I changed my mind said the turtle, please bring me back. Mr. Wizard replied....twisal,twasal,twisal,trom time for this one to come home. []

      Studebakers forever!
      Studebakers forever!

      Comment


      • #4
        for the correct answer, for the hawk which uses the large brackets up front, the suports are always mounted in the rear set of holes type of support at the rear of the engine depends on type of trans, regardless of wheel base the two insulators(flat washer,lock washer and nut) used with the flightomatic always are mounted in the rear slots of the engine rear support crossmember.

        Studebakers forever!
        Studebakers forever!

        Comment

        Working...
        X