Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

37 President Water pump

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 37 President Water pump

    I have a friend that just purchased a 37 President. Really a neat car, but were having problems trying to figure out what the flex shaft looks like between the generator and the water pump. This is a straight 8 motor and the water pump is mounted on the side of the block. Can anyone help us with a photo or other information as to how this pump and shaft should work. Thanks Or even where we might look for parts?

  • #2
    Your best bet is to try the Antique Studebaker Club (which specializes in pre-WWII Studebakers...
    Head on over to http://www.dochemp.com/9stude.html and check them out!
    Jeff[8D]



    quote:Originally posted by kzgysr

    I have a friend that just purchased a 37 President. Really a neat car, but were having problems trying to figure out what the flex shaft looks like between the generator and the water pump. This is a straight 8 motor and the water pump is mounted on the side of the block. Can anyone help us with a photo or other information as to how this pump and shaft should work. Thanks Or even where we might look for parts?


    DEEPNHOCK at Gmail.com
    Brooklet, Georgia
    '37 Coupe Express (never ending project)
    '37 Coupe Express Trailer (project)
    '61 Hawk (project)
    http://community.webshots.com/user/deepnhock

    HTIH (Hope The Info Helps)

    Jeff


    Get your facts first, and then you can distort them as much as you please. Mark Twain



    Note: SDC# 070190 (and earlier...)

    Comment


    • #3
      quote:Originally posted by DEEPNHOCK

      Your best bet is to try the Antique Studebaker Club (which specializes in pre-WWII Studebakers...
      Head on over to http://www.dochemp.com/9stude.html and check them out!
      Jeff[8D]



      quote:Originally posted by kzgysr

      I have a friend that just purchased a 37 President. Really a neat car, but were having problems trying to figure out what the flex shaft looks like between the generator and the water pump. This is a straight 8 motor and the water pump is mounted on the side of the block. Can anyone help us with a photo or other information as to how this pump and shaft should work. Thanks Or even where we might look for parts?


      DEEPNHOCK at Gmail.com
      Brooklet, Georgia
      '37 Coupe Express (never ending project)
      '37 Coupe Express Trailer (project)
      '61 Hawk (project)
      http://community.webshots.com/user/deepnhock

      Comment

      Working...
      X