Announcement

Collapse
No announcement yet.

Pulling a Fligh o matic

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Transmission / Overdrive: Pulling a Fligh o matic

    I need to replace the front pump on my '63 Wagonaire. If I unbolt the trans at the bell housing, will it slide back far enough for me to replace the pump? The car has an X frame. Have any of you done this?
    Last edited by Studeguru; 12-11-2011, 09:07 AM.
    Fred

    sigpic

  • #2
    Hi Its been awhile , But I pulled the trans from my 64 Convert. but I don't think you'll have the room to replace the pump while the trans is still in the car , Ed

    Comment


    • #3
      Originally posted by jts359 View Post
      Hi Its been awhile , But I pulled the trans from my 64 Convert. but I don't think you'll have the room to replace the pump while the trans is still in the car , Ed
      Thanks Ed.
      Fred

      sigpic

      Comment


      • #4
        Agree! There is room to move the trans to the rear far enough to get the front to drop and clear the bell housing and remove the trans for the work.

        Comment

        Working...
        X