Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage:
See more
See less

Lark gas tank to fuel pump metal line

  • Filter
  • Time
  • Show
Clear All
new posts

  • rockne10
    Also worth pricing the stainless line from Dillsburg Aeroplane Works in Dillsburg, Pa.; not much more than regular steel line.

    Brad Johnson
    Pine Grove Mills, Pa.
    '33 Rockne 10, '51 Commander Starlight, '53 Commander Starlight

    Leave a comment:

  • JDP
    Summit racing sells the line in a 25 foot roll.


    63 GT R2
    63 Avanti R1
    63 Daytona convert
    63 Lark 2 door
    62 Lark 2 door
    60 Lark HT-60Hawk
    59 3E truck
    58 Starlight
    52 & 53 Starliner
    51 Commander

    Leave a comment:

  • N8N
    On ny '55 coupe, I ordered a 25 foot roll of stainless tube from Classic Tube and used that. I did have to bend and flare it myself, which was no problem except for one particularly tight 90 degree bend.


    55 Commander Starlight

    Leave a comment:

  • black56hawk
    started a topic Lark gas tank to fuel pump metal line

    Lark gas tank to fuel pump metal line

    A PO of my 63 Daytona has run rubber fuel hose from the tank all the way to the fuel pump. That has to go. Does anyone make a reproduction steel fuel line for these cars?

    I know I can bend my own, but I'd rather have a one-piece line than have to join two or more pieces together, if that's possible.

    Curtis French
    63 Daytona conv., 3spd, OD
    56 Golden Hawk, 3spd, OD