Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

Clutch Install (Pictures the rebuilder's sent me)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Engine: Clutch Install (Pictures the rebuilder's sent me)

    (Pictures the rebuilder's sent me)

    http://studem15a-20.blogspot.com/
    1948 M15A-20 Flatbed Truck Rescue
    See rescue progress here on this blog:
    http://studem15a-20.blogspot.com/

  • #2
    I am surprised they are putting the flywheel and clutch on with the block still open and unpainted. Or is this just a trial assembly? Still I guess this would be as easy as it can possibly get to dial in the bell housing and align the clutch.
    _______________
    http://stude.vonadatech.com
    https://jeepster.vonadatech.com

    Comment


    • #3
      Yes, indeed, on both points... I would have at least installed the pan, which would have required installing the pistons and rods and the rest of the lower end components.
      1948 M15A-20 Flatbed Truck Rescue
      See rescue progress here on this blog:
      http://studem15a-20.blogspot.com/

      Comment

      Working...
      X