Announcement

Collapse
No announcement yet.

60 hawk raditator to hood seal

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Welcome
    replied
    Originally posted by rusty nut garage View Post
    Does the rubber seal mount to the outside of the upper radiator support, or the inside? Parts manual looks to show that it mounts on the outside or grill side. . staples were installed from the rear or engine side forward. orginal seal is MIA.
    Thanks for the help!
    At least on '56 Hawks; the Baffle Seal is to be attached to the FORWARD facing surface of the Upper Radiator Support. The "BOSTITCH" staples are also shown on the Studebaker Engineering drawing as being installed from front --> rear.

    If you do not feel comfortable with the above assembly description and would prefer to see it on the Engineering drawing for yourself, just PM me with your email address.

    Leave a comment:


  • rusty nut garage
    replied
    Thank you!!!

    Originally posted by 64v-k7 View Post
    see pic here...

    Leave a comment:


  • 64V-K7
    replied
    See pic here...

    Leave a comment:


  • rusty nut garage
    started a topic Body / Glass: 60 hawk raditator to hood seal

    60 hawk raditator to hood seal

    Does the rubber seal mount to the outside of the upper radiator support, or the inside? Parts manual looks to show that it mounts on the outside or grill side. . staples were installed from the rear or engine side forward. orginal seal is MIA.
    Thanks for the help!
Working...
X