Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

Tranny Gasket

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • JohnM15
    replied
    Sort of. There is the cluster shaft that is basically flush with the case. When I put the shaft in, before pounding in the last 1/4" or so I coated the shaft on both ends with some medium strength Locktight so that wouldn't leak. I have never seen a gasket there and there wasn't one when I took it off... Why would the dingbats make one and put it in the gasket kit?

    Leave a comment:


  • StudeRich
    replied
    You do have to wonder WHY! All it would be sealing is AIR!

    Leave a comment:


  • JohnM15
    started a topic Transmission: Tranny Gasket

    Tranny Gasket

    I'm putting together a T9 and the gasket kit has a gasket that goes between the tranny and bell housing. Is this gasket needed or did the gasket manufacturer go overboard? The parts manual does not show one in either the clutch section or the tranny section.
Working...
X