Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

Brackets & power steering pump

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Swifster
    replied
    Vintage Air sells a mount bracket for the Sanden compressors they sell. If you're using a new system, this would be the way to go.

    ---------------------------------------------------------------------------------------------------
    Tom - Valrico, FL

    1964 Studebaker Daytona

    Leave a comment:


  • sbca96
    replied
    Power steering pump is the same as Eaton early 60s Fords, you can get
    one from Studebaker International - or even National Parts Depot for a
    1965 Mustang. There are special brackets that bolt to the pump that
    then bolt to the water manifold. S.I. also has those.

    GM three wire alt is simple to install on an Avanti R1, I did an article
    in Avanti Magazine some years ago on the process, and recently posted
    the details on this thread :

    http://www.studebakerdriversclub.com...rms=3,wire,alt

    pictures here :

    http://hometown.aol.com/sbca96/images/AvantiGMalt/



    Tom

    '63 Avanti, zinc plated drilled & slotted 03 Mustang Cobra 13" front disc/98 GT rear brakes, 03 Cobra 17" wheels, GM alt, 97 Z28 leather seats, soon: 97 Z28 T-56 6-spd, Ported heads w/SST full flow valves, 'R3' 276 cam, Edelbrock AFB Carb, GM HEI distributor, 8.8mm plug wires

    Leave a comment:


  • mtdoraford
    started a topic Brackets & power steering pump

    Brackets & power steering pump

    Does anyone have a power steering pump they would like to sell for a 289 Avanti. Also, can anyone tell me please, who makes the new brackets for a new one wire alternator and an air compressor.

    The old brackets were made, are crooked for the alternator and they were for the old style compressor. Guys, thanks for your help!

    I can be reached at a new e-mail: hansenroger@bellsouth.net

    thank you!

Working...
X