Announcement

Collapse
No announcement yet.

Cowl to fender rubber

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Paint: Cowl to fender rubber

    I have a 52 Champion and I want to know what people do to blend
    the black rubber to the body color. If the rubber is painted won't it
    chip from road vibration etc. Thanks.

    Joe

  • #2
    Apply the new one after the cowl is painted. or mask it, leave it natural black.

    My error, I didn't read Cowl to Fender, I read Cowl to Hood.
    Last edited by Tom Bredehoft; 06-04-2011, 11:10 AM.

    Comment


    • #3
      Originally posted by jmccarrol@hotmail.com View Post
      If the rubber is painted won't it
      chip from road vibration etc.
      Yes it will so, don't paint it. Will look unnatural if you do.
      "All attempts to 'rise above the issue' are simply an excuse to avoid it profitably." --Dick Gregory

      Brad Johnson, SDC since 1975, ASC since 1990
      Pine Grove Mills, Pa.
      '33 Rockne 10,
      '51 Commander Starlight,
      '53 Commander Starlight "Désirée",
      '56 Sky Hawk

      Comment


      • #4
        The rear fender to quarter panel welting should be body color (unpainted if black, painted for most colors), but the cowl to front fender insulator should remain unpainted.
        Gary L.
        Wappinger, NY

        SDC member since 1968
        Studebaker enthusiast much longer

        Comment

        Working...
        X