Announcement

Collapse
No announcement yet.

Choke Heater Tube

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • PeterHawk
    replied
    Jeff, PM sent

    Leave a comment:


  • DEEPNHOCK
    replied
    I do not have my book open, so I can't tell you which style you are referring to.
    But, if it is the u-loop tube....Yes it can be replaced.
    The u-loop tube is held in a wedge shaped plug (think beaker stopper plug).
    You can drive the plug (including the u-loop tube...it's all one piece) out of the intake from the inside of the heat crossover with a long knockout punch.
    I have seen NOS tube and plug assemblies for sale on vendor tables from time to time.
    I have some extra used ones of you need one.
    HTIH
    Jeff

    Originally posted by PeterHawk View Post
    Can the choke heater tube on a 4 bbl intake manifold for a 289 engine (as shown on page 77 of the Chassis Parts Catalog) be replaced? If so, who would be a vendor for the choke heater tube?

    Leave a comment:


  • PeterHawk
    started a topic Fuel System: Choke Heater Tube

    Choke Heater Tube

    Can the choke heater tube on a 4 bbl intake manifold for a 289 engine (as shown on page 77 of the Chassis Parts Catalog) be replaced? If so, who would be a vendor for the choke heater tube?
Working...
X