Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

Dual chamber master cylinder

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Dual chamber master cylinder

    I have just purchased a 1962 Daytona that is in need of a brake overhaul after sitting for some 14 years. While I am at it I would like to change over to a dual type master cylinder that is compatible with the drum type brakes. Does anyone out there have a specific recommendation for a firewall mounted master cylinder in this car?

    !952 Champion Starlight since October,1971. !962 Daytona
    since May, 2007.
    "In the heart of Arkansas."
    Searcy, Arkansas
    1952 Commander 2 door. Really fine 259.
    1952 2R pickup

  • #2
    1970's AMC's with drum brakes.

    JDP/Maryland


    63 GT R2
    63 Avanti R1
    63 Daytona convert-63
    63 Lark 2 door
    62 Lark 2 door
    60 Lark HT-60Hawk
    59 3E truck
    58 Starlight
    52 & 53 Starliner
    51 Commander

    JDP Maryland

    Comment


    • #3
      Thanks to 55PREZ I got the link to the Bob Johnstone Avanti site that I had lost a while back. After reading the brake info in it I decided to try a master cylinder listed for a 1971 Dodge Coronet with non disc brakes. It has a 4 bolt flange and a 1 1/32" bore. Has anyone had experience with a similar set-up? Please remember this is for drum brakes.

      !952 Champion Starlight since October,1971. !962 Daytona
      since May, 2007.
      "In the heart of Arkansas."
      Searcy, Arkansas
      1952 Commander 2 door. Really fine 259.
      1952 2R pickup

      Comment

      Working...
      X