Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

GT Hawk 4 spd installation kit.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • GT Hawk 4 spd installation kit.

    For anyone looking for a complete Hawk 4 spd and all accessories, check out e-bay item 300111297591..

    Everything is new and ready to go..

    Thanks

    Barry

    Barry Leppan
    Burlington, Ont. Canada
    64 Daytona HT 5-spd
    64 GT Hawk R-1/AC/Powershift
    Barry Leppan
    Ontario, Canada
    64 Daytona R-1 Convertible & 64 GT Hawk R-1
    GT Hawk Registry & SDC, Hamilton Chapter [IMG]

  • #2
    Here's the link:

    http://cgi.ebay.com/ebaymotors/ws/eB...7591&rd=1&rd=1


    1964 GT Hawk soon to be R2 Clone
    1964 GT Hawk
    PSMCDR 2014
    Best time: 14.473 sec. 96.57 MPH quarter mile
    PSMCDR 2013
    Best time: 14.654 sec. 94.53 MPH quarter

    Victoria, Canada

    Comment


    • #3
      Barry,
      Is the trans actually NOS? Rebuilt? If rebuilt, what was replaced?

      Is that an aluminum case T-10?




      Dick Steinkamp
      Bellingham, WA

      Comment


      • #4
        I read his ad to say it is an original new trans. removed when new! [:0]
        The cases were painted aluminum silver and were cast iron. But I am not there with a magnet either! [:0]

        QUOTE:"The car was never driven before the four speed parts were removed. All the parts are new."

        quote:Originally posted by Dick Steinkamp

        Barry,Is the trans actually NOS? Rebuilt? If rebuilt, what was replaced?
        Is that an aluminum case T-10?
        StudeRich
        Studebakers Northwest
        Ferndale, WA
        StudeRich
        Second Generation Stude Driver,
        Proud '54 Starliner Owner

        Comment


        • #5
          I will try to clarify as requested..

          I purchased the car last year and it had been 'body off' restoration by the previous owner.

          Every mechanical part on the car has been replaced or upgraded with NOS or repo and the car was about 90 % finished.

          It was originally built as a powershift car, and the prev owner converted it to 4 speed with all new/nos parts.

          It is not an original new transmission removed when new,.. it has just never been driven since the new conversion was done several years ago. It would be a rebuild, not an original, and it appears to be a total rebuild, as per the rest of the car..

          The tail shaft is aluminum and the main body case is cast and painted aluminium

          Barry



          Barry Leppan
          Burlington, Ont. Canada
          64 Daytona HT 5-spd
          64 GT Hawk R-1/AC/Powershift
          Barry Leppan
          Ontario, Canada
          64 Daytona R-1 Convertible & 64 GT Hawk R-1
          GT Hawk Registry & SDC, Hamilton Chapter [IMG]

          Comment


          • #6
            Shoot...
            Most of my 'installation kits' were complete Stude's (for parts)
            Jeff[8D]
            HTIH (Hope The Info Helps)

            Jeff


            Get your facts first, and then you can distort them as much as you please. Mark Twain



            Note: SDC# 070190 (and earlier...)

            Comment

            Working...
            X