Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

'63-64 GT headlight rim screw description

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • '63-64 GT headlight rim screw description

    Greetings, All,

    Can anyone describe the screw which holds on the headlight rim bezel on a '63-64 GT? It looks like it should be a 10-32 about 3" long, but as much description as possible would help. Also, part numbers and any source for same would be greatly appreciated.

    thnx, jv.

    PackardV8
    PackardV8

  • #2
    SASCO has them NOS.

    JDP/Maryland


    63 GT R2
    63 Avanti R1
    63 Daytona convert-63
    63 Lark 2 door
    62 Lark 2 door
    60 Lark HT-60Hawk
    59 3E truck
    58 Starlight
    52 & 53 Starliner
    51 Commander

    JDP Maryland

    Comment


    • #3
      according to the parts book, the one for regular Hawks is a no. 8x1-1/8" oval phillips head sheet metal screw. So I assume that the one for a GT would be similar although maybe a different length.

      nate

      --
      55 Commander Starlight
      http://members.cox.net/njnagel
      --
      55 Commander Starlight
      http://members.cox.net/njnagel

      Comment


      • #4
        They are a machine screw, not sheet metal.

        JDP/Maryland


        63 GT R2
        63 Avanti R1
        63 Daytona convert-63
        63 Lark 2 door
        62 Lark 2 door
        60 Lark HT-60Hawk
        59 3E truck
        58 Starlight
        52 & 53 Starliner
        51 Commander

        JDP Maryland

        Comment


        • #5
          PN is 1523X39




          Dick Steinkamp
          Bellingham, WA

          Comment


          • #6
            Hi, JDP,

            I assumed SASCO would have them if anyone would. However, I had spent a half-hour on SASCO's web site and if there is a way to find the headlamp screws without a part number, I couldn't make it happen. Thanks to Dick for the P/N and to JDP for suggesting SASCO, because once I got started looking around, naturally, I had been meaning to order some parts for my truck, so those two screws ended up costing me $300.

            thnx, jv.

            PackardV8
            PackardV8

            Comment

            Working...
            X