Announcement

Collapse
No announcement yet.

Brake lines for '65 Cruiser

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • prez55
    replied
    Joe Know a guy who can do them local if you have old ones. I probably do if you don't. Why ss since steel lasted 50 years. See you Sat. at Founders day meet.

    Leave a comment:


  • ozarkman
    replied
    Summit, or maybe it was Jeg's, sells a kit with a 25' spool of stainless, fittings, a bender, and a flaring tool. You might look at that too.

    Leave a comment:


  • BobPalma
    replied
    Joe: I'm glad Bill Pressler saw this and posted. I drafted an earlier reply to this topic, delineating Bill's terrible experience with them, but thought better of posting it, so deleted without posting. Fortunately, Bill saw this and posted accordingly.

    In-Line Tube appears to have simply not spent enough time researching and looking at the many variables of Studebaker brake lines. The market may be just too small for them to invest the R&D....in which case they should carefully identify and advertise what they do have and not mislead people into thinking they have patterns and applications for things they do not have. BP

    Leave a comment:


  • rockne10
    replied
    Why not just make them yourself? I get my stainless tube stock from Dillsburg Aeroplane Works.
    The Dillsburg Aeroplane Works
    Aircraft-Race Car-Machine Shop-Raw Materials
    Charles T. Vogelsong
    114 Sawmill Road, Dillsburg, Pa 17019
    (717) 432-4589

    Leave a comment:


  • Jim B PEI
    replied
    Here is a link to specs including wheelbases. For 65 and 66, only 2 doors were 109", all 4 doors sedans including the Cruiser, & the wagons are 113".
    http://www.carnut.com/specs/gen/stud60.html#chas

    This is perhaps a silly question already answered many times, but if you are using Turner Brake parts, why not ask who they would recommend? There are so many variations in 60's Studebaker master cylinders (and lines) power (Hydrovac single and non Hydrovac dual), non power dual, drum disc my head spins.

    Leave a comment:


  • Bill Pressler
    replied
    Originally posted by JRoberts View Post
    I went to In Line Tube's website ready to order stainless steel brake lines for the Cruiser. They list Larks 1960-64. They list them at 113" wheelbase which I think is correct for my car as well. My question is, is there any difference in the brake lines on a '64 and '65. Also does it make any difference that it is a Cruiser? I will be putting Turner Discs on the front.

    Thanks in advance for the help.
    DON'T DO IT! Inline Tube is absolutely, positively, the worst vendor experience I've EVER had with my '64 Daytona....heck, either Stude.

    Their website says '60-64, but what I got was for an under-floor master cylinder...too short. Remember, Larks went to swing pedals in '61 and I think at the same time went to the underhood master cylinder. Also remember, in '63 Larks (most, anyway) went to a dual master cylinder. Before that, only single cylinders existed. Also, remember in '63 Larks started offering disc brakes. Nothing on Inline Tube's website mentions any of these very basic differences from '60 to '64.

    The guy installing the brake lines for me got attitude on the phone from them. They resent a "revised" set and they too were too short and bent incorrectly, and the stainless was brittle as well. When I sent an email complaining further (yet politely), I was never replied to.

    Only vendor I've ever had a real complaint with, and that didn't handle a complaint.

    Walk, no RUN, away from them!
    Last edited by Bill Pressler; 01-21-2011, 11:24 AM.

    Leave a comment:


  • N8N
    replied
    cruiser makes a difference in WB

    I don't think there are any other differences, although they should make you specify power/non power and also whether or not you have front discs. I believe with turner brakes you specify front drums and everything should work fine.

    nate

    Leave a comment:


  • JRoberts
    started a topic Brake lines for '65 Cruiser

    Brake lines for '65 Cruiser

    I went to In Line Tube's website ready to order stainless steel brake lines for the Cruiser. They list Larks 1960-64. They list them at 113" wheelbase which I think is correct for my car as well. My question is, is there any difference in the brake lines on a '64 and '65. Also does it make any difference that it is a Cruiser? I will be putting Turner Discs on the front.

    Thanks in advance for the help.
Working...
X