Announcement

Collapse
No announcement yet.

A arm bushings

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 52 Ragtop
    replied
    Chuck Collins as Nate stated has the Derin ones, you do NOT have to use the steel sleeves. They come drilled and tapped for zerk fittings. They (in my opinion) do not make the ride any harder. The R-3 front end with the solid bushings are pretty much the same as my "prototype" (for the R-3 set up) 52 Commander.

    Jim

    Leave a comment:


  • Paul Keller
    replied
    A company in Australia did up until recently when it was purchased by a another firm - They dropped Stude' apps due to low usage (read: not profitable).
    Other discussions as noted above.
    Paul K

    Leave a comment:


  • PackardV8
    replied
    Try the "search" function. Many previous discussions.

    jack vines

    Leave a comment:


  • N8N
    replied
    Originally posted by TXmark View Post
    Does any on make them in polyurethane
    I don't believe so but Chuck Collins (studebakerparts.com) sells them in Delrin. $125/set and I believe you have to reuse your old steel sleeves.

    good luck

    nate

    Leave a comment:


  • TXmark
    started a topic A arm bushings

    A arm bushings

    Does any on make them in polyurethane
Working...
X