Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

distributor 180 degrees off.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • distributor 180 degrees off.

    Would an engine be able to run if the distributor was 180 degrees off, but the firing order correct ?

  • #2
    No....unless someone kept the wires in the same order off the cap ("firing order") and also moved them all around 180 degrees from their original positions.
    We've got to quit saying, "How stupid can you be?" Too many people are taking it as a challenge.

    Ayn Rand:
    "You can avoid reality, but you cannot avoid the consequences of avoiding reality."

    G. K. Chesterton: This triangle of truisms, of father, mother, and child, cannot be destroyed; it can only destroy those civilizations which disregard it.

    Comment


    • #3

      Comment


      • #4
        Yes, as BP stated, the engine in my 62 Daytona was that way! I replaced the wires, and put them in correctly, would NOT start! it burped and farted, but no start! I finally figured it out, moved the dist. and she fired right up.

        Jim
        "We can't all be Heroes, Some us just need to stand on the curb and clap as they go by" Will Rogers

        We will provide the curb for you to stand on and clap!


        Indy Honor Flight www.IndyHonorFlight.org

        As of Veterans Day 2017, IHF has flown 2,450 WWII, Korean, and Vietnam Veterans to Washington DC at NO charge! to see
        their Memorials!

        Comment


        • #5
          my 63' Cruiser is running perfectly that way.....turned 180 degrees...! I don't want to replace the wires right now....

          Comment

          Working...
          X