Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

Avanti Vent Handle

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Skip Lackie
    replied
    It's a pin that you should be able to drive out with a small punch. A little penetrating oil might help. It's the same design as 60s Studebakers.

    Leave a comment:


  • rustineyes
    replied
    Thank You

    Much appreciated

    Originally posted by Rerun View Post
    There is a 3/32" diameter x 1/2" long roll (spring) pin that holds the handle on. If you don't have a pin punch of that diameter, flattening the point of an appropriately sized nail often works. Applying a few drops of a good penetrating oil some hours before removal often helps. have an assistant support the handle while you punch out the pin. Replacement roll pins are available at a good hardware store.

    Leave a comment:


  • Rerun
    replied
    There is a 3/32" diameter x 1/2" long roll (spring) pin that holds the handle on. If you don't have a pin punch of that diameter, flattening the point of an appropriately sized nail often works. Applying a few drops of a good penetrating oil some hours before removal often helps. have an assistant support the handle while you punch out the pin. Replacement roll pins are available at a good hardware store.

    Leave a comment:


  • rustineyes
    started a topic Avanti Vent Handle

    Avanti Vent Handle

    Can somebody tell me how to remove the driver's side window vent handle on a 1974 Avanti ? I see a small hole with a rusty appearance inside, but cannot determine what it is. it is in the closed position and the button is depressed. Pin ? Set screw ? Thank You.
Working...
X