Announcement

Collapse
No announcement yet.

J-5472-1 Installation tool dimension

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • J-5472-1 Installation tool dimension

    I'm ready to install the rubber bushings in the lower control arm of the 83 Avanti and cannot find the length of installation tool J-5472-6 which I'm ready to fabricate. A search of the site yields a length of 6 7/8" for the upper tool but no mention of the length of the lower tool.

    I also assume the tool J-5472-1 are basically a pipe cap that just fits over the bushing to press against.

    May I also assume that the 6 7/8" dimension is correct for the upper.

    Thanks in advance

    Bob
Working...
X