Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

GOtta Glue some rubber-63 GT HAwk

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • KGlowacky
    replied
    My mistake. Do not over apply. Sorry

    Leave a comment:


  • Guest's Avatar
    Guest replied
    "And remember you are glueing rubber to a car not to the space shuttle so do over apply" Great point learned that one the hard way......

    Leave a comment:


  • starlightchamp
    replied
    Thank you all for the excellent advice. I have bought the 3M adhesive and remover.
    Also will use the masking tape trick. My Hawk is 35 miles away at my son's in Santa Ynez valley where tempertures have been over 100 so no problem in doing the job where it is warm.Javascript:insertsmilie('')

    1950 Champion Starlight
    1963 Hawk GT
    Santa Barbara
    CA

    Leave a comment:


  • KGlowacky
    replied
    I have done many many wetherstripping jobs at my shop and here are a few well learned secrects. First I have used both the 3m yellow and black and have seen no diff. Apply 3m to both the ruuber and the metal and let set up. DO NOT try to put them together right of way or you will have a mess because they will not stick. I let them dry pretty good and add a little more and then stick togeter.And remember you are glueing rubber to a car not to the space shuttle so do over apply. But the first step is a really neat trick. Take masking tape and place it on the metel on both sides of where the glue and rubber are going to go. After the glue has set up all you need to do is peel of the tape and all the excess glue will be gone and stuck to the tape. Many customers have commented to me they have never seen anyone who gets such perfect clean lines. And if you still get some on the car don't worry 3m adhesive cleaner will take it right off and leave the paint. And do not strech the rubber, prefit it dry and put a couple marks on it at diifferent locations to keep you on the right track. GOOD LUCK.

    Leave a comment:


  • rockne10
    replied
    3M also makes a weatherstrip glue remover that will aid in removing your old residue.

    Brad Johnson
    Pine Grove Mills, Pa.
    33 Rockne 10
    51 Commander Starlight
    53 Commander Starlight

    previously: 63 Cruiser, 62 Regal VI, 60 VI convertible, 50 LandCruiser

    Leave a comment:


  • JDP
    replied
    3M yellow weatherstrip cement. (black is pretty, but not as sticky) Wipe the new rubber down with enamel reducer or the like before gluing. That'll get the mold release off the rubber so it'll stick.


    Studebaker On The Net
    http://stude.com
    Studebaker News Group
    http://groups.google.com/group/alt.autos.studebaker
    Arnold Md.
    64 Daytona HT
    63 R2 4 speed GT Hawk
    63 GT Hawk
    63 Avanti R1/AC
    63 Avanti R2/4 speed
    62 Lark 2 door
    62 GT(parts car)
    60 Lark convert
    60 Hawk
    56 Power Hawk/4 speed/289
    51 Commander

    Leave a comment:


  • Guest's Avatar
    Guest started a topic GOtta Glue some rubber-63 GT HAwk

    GOtta Glue some rubber-63 GT HAwk

    I have bought lots of new rubber for cowl, trunk, doors etc. I expect a contact cement is best but experience says you get one chance to join--nervous situation. Any suggestions from experienced restorers as to brand and quantirty? Also ,any hints on removing old rubber ?

    Thanks !!

    1950 Champion Starlight
    1963 Hawk GT
    Santa Barbara
    CA
Working...
X